Cisco 300-430 dumps: serves all 300-430 ENWLSI exam candidates

The newly updated Cisco 300-430 dumps contain 162 exam questions and answers that candidates can study using the 300-430 dumps PDF and 300-430 dumps VCE to help you successfully pass the 300-430 ENWLSI exam.

You are welcome to download the latest Cisco 300-430 dumps:, Lead4Pass 300-430 dumps serve all candidates taking the 300-430 ENWLSI exam and guarantee you 100% Successfully passed the 300-430 ENWLSI exam.

Download the Cisco 300-430 PDF for free sharing online:

Share the latest Cisco 300-430 dumps exam questions and answers for free

New Question 1:

A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?

A. Configure a second WLC to support half of the APs in the deployment.

B. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.

C. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.

D. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0- GHz band.

Correct Answer: B

New Question 2:

A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)

A. network analyzers

B. malware

C. lost and stolen devices

D. keyloggers

E. unauthorized users

Correct Answer: BC

New Question 3:

Which two restrictions are in place with regards to configuring mDNS? (Choose two.)

A. mDNS uses only UDP port 5436 as a destination port.

B. mDNS cannot use UDP port 5353 as the destination port.

C. mDNS is not supported on FlexConnect APs with a locally switched WLAN.

D. Controller software must be newer than 7.0.6+.

E. mDNS is not supported over IPv6.

Correct Answer: CE

New Question 4:

An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which configuration must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?

A. pre-authentication

B. local EAP

C. authentication caching

D. Cisco Centralized Key Management

Correct Answer: B

New Question 5:

Which QoS level is recommended for guest services?

A. gold

B. bronze

C. platinum

D. silver

Correct Answer: B

New Question 6:

Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?

A. FlexConnect ACL

B. VLAN name override


D. AAA override

Correct Answer: D

New Question 7:

An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?

A. permit-ACL

B. WMM required

C. mark

D. rate-limit

Correct Answer: C 8/AVC_8point8_dg.html

New Question 8:

An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN. Which configuration is needed to complete this task?

A. Change the WLAN reserved bandwidth for WebEx

B. Create an AVC profile for WebEx

C. Create an ACL for WebEx

D. Change the AVC application WebEx-app-sharing to mark

Correct Answer: D

New Question 9:

Which three properties are used for client profiling of wireless clients? (Choose three.)

A. HTTP user agent



D. hostname

E. OS version

F. IP address

Correct Answer: ABC


Question 10:

Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: D

Note: To enable Local switching, you have to disable central switching

New Question 11:

What is the difference between PIM sparse mode and PIM dense mode?

A. Sparse mode supports only one switch. Dense mode supports multiswitch networks.

B. Sparse mode floods. Dense mode uses distribution trees.

C. Sparse mode uses distribution trees. Dense mode floods.

D. Sparse mode supports multiswitch networks. Dense mode supports only one switch.

Correct Answer: C imc-tech-oview.html

New Question 12:

Refer to the exhibit.

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)



C. 802.11e



Correct Answer: CD

New Question 13:

A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?





Correct Answer: B

NMSP (Network Mobility Services Protocol)?The protocol used for communication between Wireless LAN Controllers and the Mobility Services Engine. In the case of a wIPS Deployment, this protocol provides a pathway for alarm information to be aggregated from controllers to the MSE and for wIPS configuration information to be pushed to the controller. This protocol is encrypted.

Download the Cisco 300-430 PDF for free sharing online:

The above is only a part of Cisco 300-430 dumps exam questions and answers, you can use the above exam questions and answers to improve yourself, not only that, we welcome you to download the latest Cisco 300-430 dumps exam questions: (Total Questions: 162 Q&A), help you truly pass the 300-430 ENWLSI exam.

More IT certification blogs: [Amazon], [Oracle], [Cisco], [Microsoft], [Citrix]
[CompTIA], [VMware], [IBM], [HP], [NetApp], [Juniper]

You may also like...